Ic Group - Procom DVS-21 User Manual

User Guide
DVS-21
Destination call station
The address of the destination is specified directly and not determined via the Call
To enter address
station number.
Call station number Unique number of the Destination call station
The line is switched on if the program is activated. For example, relays can be
Special line
switched or keys can be illuminated.
Flag (NAND) [IN] The program can be turned off by this flag or switching on can be prevented.
[IN] The program can be switched on by this flag. It is possible to acquire AF
Flag (OR)
channels.
[OUT] The flag is switched on if the program is activated. Further programs can be
Flag (OUT) 1/2
activated thereby if adaptation to individual requirements is required.
Busy flag [OUT] for processing the busy state
Clear flag [IN] The connection can be broken by means of this flag.

9.6 IC Group

The IC Group program established a connection with multiple call stations simultaneously. Calls take
place without further configuration as a "conference" (each to each)
Priority
Codec
Interval time
No receiving in idle
state
Own/Analog
Input/call station (Setting Own)
Address, Port, Line
Input/call station (Setting Analog)
Address AF, Port
Address 24LI, Port, Line
Call storage
02/2018 • V.1.0 • L. Wolle
© 2017 ProCom
Handling of priorities (see Section
Audio compression method by which the codec handles the actual connection.
The options are: µLaw (default), ADPCM (7kHz) and aLaw
By specifying a time <> 0, a group call switches, once a subscriber has
answered, to a selective IC call between the two subscribers. The call remains
selective, as long as someone speaks within the time.
The call station does not receive any calls of the group. It can, however,
establish a connection to the group. Having said this, by using the programmed
Interval time a selective call can be made by a subscriber replying.
Selects the type of call station (ProCom or analog call stations).
Address and port of the module to which the station is connected and the line
(key) that is used. (4NSA)
Address and port of the module to which the AF line of the call station is
connected. (4NPA)
Address and port of the module to which the control line of the call station is
connected. (24LI)
Time for which the key is illuminated (flashing) after missed calls
®
Professional Communication & Service GmbH • Technical changes reserved.
9.1)
(see Section 9.1)
81/131