Standby Mode; Steering Modes - Simrad WR20 RemoteCommander Manual

WR20 Remote Commander

6.3 Standby mode

To gain control of the Autopilot, press S
"Inactive" symbol disappears from the display, and the MODE
SoftKey function appears (Fig. 6.2).
In Standby mode pressing the
will control the rudder. If either key is pressed, the display will
indicate "Power Steer" (Fig. 6.3).
Note
As rudder is added in either direction, the display will change to
show a single arrow " " and a double arrow " ".

6.4 Steering modes

Pressing the MODE SoftKey enters the steering mode menu,
"Standby" and "Auto Compass" will be listed as standard. Further
options such as Auto NoDrift, Auto Nav and Auto Wind, may be
listed depending on the settings of the Autopilot itself (Fig. 6.4).
Use the
M
ENU
34
^mORJN N
pq^ka_v
eb^afkdW
m• • • • • • MR• • • • • • p
Fig. 6.2 - Standby mode (Active)
^mORJN N
pq^ka_v= = kcr
mçïÉê=píÉÉê===
eb^afkdW
P• • • • • • 15
Fig. 6.3 - Powersteer display
or keys to scroll through the menu options. Press the
key to select the mode you want to enter.
/A
TBY UTO
NPS°j
jlab
F
Port or Starboard NavPad key
NPS°j
• • • S
jlab
F
key. The