Instruments; General; Display - Simrad WR20 RemoteCommander Manual

9 INSTRUMENTS

9.1 General

The WR20 Remote Commander can be used to control all of the
major functions of any WR20 compatible instrument that is
attached to the network.
Note
In order to view Instrument data on the WR20 display, please refer
to section 11.2.

9.2 Display

After selecting "INST SYS" from the product list, the WR20
display will show a list of instruments attached to the network
(Fig. 9.1).
Using the
control and press the
If the list of attached instruments has more items above those being
displayed, then
If there are more items below those being displayed, then
be shown in the bottom left corner of the LCD.
Once selected, the display shows a graphical representation of the
instrument keypad, together with the corresponding keys on the
WR20 handset that control their functions (Fig 9.2).
In the example shown, the "LIGHTS" key on the Depth instrument
is controlled by the
hand SoftKey on the handset.
pÉäÉÅí= = fåëí
fpNOJM=tfka
fpNOJM=`lj_f
fpNOJM=abmqe
fpNOJM=jbd^
F
Fig. 9.1 - Instrument selection menu
or keys, highlight the instrument you want to
M
ENU
will be shown in the top left corner of the LCD.
key, and the "DEPTH" alarm by the right
or key to select it.
Instruments
will
51