Product Info; Reset B/Station; Reset Defaults; S/W Upgrade - Simrad WR20 RemoteCommander Manual

WR20 Remote Commander

4.2.3.2 Product info

When "Product Info" is selected from the "Installation" menu, the
Software Version and Serial Number is displayed for both the
Handset and Basestation (Fig. 4.6).
To return to the setup list press

4.2.3.3 Reset B/station

The BaseStation is always powered on when it is connected to a
live SimNet system. The "Reset B/Station" function essentially
switches the BaseStation off and then on again. This has the
advantage that it can be done remotely from the handset no matter
where the BaseStation is mounted.
To switch the BaseStation off and then on again select "Reset
B/Station" from the "Installation" menu and press
is executed immediately. Press

4.2.3.4 Reset defaults

This function will set user configurable variables back to the
factory preset values.

4.2.3.5 S/W upgrade

In the event that software upgrades become available these can be
downloaded to the WR20 over Bluetooth. Instructions for
downloading will be supplied with the software upgrade.

4.2.4 Phone setup

From the "WR20 Setup" menu your WR20 can be paired with
many makes of mobile phone that feature Bluetooth Headset
support. The "Phone Setup" menu allows this feature to be enabled
28
mêçÇìÅí= = fåÑç
toOM ptW
toOM pkW t`MMMMVP
t_OM ptW
t_OM pkW t`MMMMVQ
F
Fig. 4.6 - Product Info
.
to return to the previous menu.
MMKPN
MMKOO
M
ENU
. The reset