Troubleshooting; Spares And Accessories - Simrad WR20 RemoteCommander Manual

WR20 Remote Commander

12.3 Troubleshooting

These simple checks should be carried out before seeking technical
assistance and may save time and expense.
General Symptoms
Handset will not switch
on
Communication Failure
No backlighting
Product under control
not responding
Data missing from data
pages
Before contacting your servicing agent, please note the unit's serial
number.
12.4 Spares & accessories
The following spares and accessories are available from local
Simrad agents.
EXPC05*
EXPC20*
LS80
MAR50
* One off required to connect Basestation to RS80 series VHF.
66
Possible Cause
• Battery Not Charged
• Handset out of Range
of Basestation
• Handset not Paired to
Basestation
• Light level set at 0
• Communication
conflict
• Only data that is on
the network will be
displayed
VHF Cable (5 meters)
VHF Cable (20 meters)
External waterproof VHF Loudspeaker
240v Mains Handset charger
Remedy
• Re-charge battery
• Move handset closer
to Basestation
• Pair Handset to
Basestation
( Section 12.2)
• Increase light level
(Section 4.2.1.1)
• Press product key to
refresh display
• Ensure data is being
sent out on the
network.