Data Displays; General; Display - Simrad WR20 RemoteCommander Manual

11 DATA DISPLAYS

11.1 General

The WR20 can display data from various sources on the network
simultaneously. The display is user configurable both in terms of
the type of data to be shown and also the number of lines of data in
the display (maximum of 4). If only 1 or 2 Data Items are to be
displayed, then the size of the displayed data is enlarged. The
units in which data is displayed are also selectable, please refer to
Section 4.2.2.

11.2 Display

After selecting "DataPages" from the product menu, the WR20
display will show a list of available pages (Fig. 11.1).
The pages are pre-configured at the factory however they can be
customised as required.
Using the
press the
If there are more pages above those being displayed, then
shown in the top left corner of the LCD. If there are more pages
below those being displayed, then
left corner of the LCD.
Once a page has been selected, the display will show the Simrad Group
data associated with that page. An example is shown in (Fig. 11.2).
To scroll to the next data page press the
a~í~m~ÖÉë
m~ÖÉ=O
m~ÖÉ=P
m~ÖÉ=Q
m~ÖÉ=R
bafq
F
Fig. 11.1 - DataPages menu
or keys, highlight the one you want to view and
M or key to select it.
ENU
lkLlcc
will be shown in the bottom
or key.
Data Displays
will be
57