Introduction; General - Simrad WR20 RemoteCommander Manual

1. INTRODUCTION

1.1 General

The WR20 Remote Commander is a sophisticated wireless
command centre comprising a rugged, compact, Handset and
SimNet Base Station. It enables you to remotely control all of your
Fig 1.1 - Remote
Commander
body that is fully waterproof and houses an integral Li-Ion
rechargeable battery that is automatically charged whenever it is
placed in its cradle.
Note
A product that is under command from the WR20 can be operated
locally by direct operation at the units own keypad in the normal
way.
Warning
As with all electronic navigational equipment, it is only an
aid to navigation and should not be used as a substitute
for good seamanship. Remember - Maritime law requires
that you keep a good lookout at all times.
SimNet electronics such as Plotter/Radar, Autopilots
and Instruments. It also controls the VHF with the
advanced features of voice calls.
When paired to a mobile phone it offers the same
operating features as a Bluetooth Handset.
Using the latest Bluetooth technology means that you
are always in control when you want to be.
The WR20 has safety in mind, so it's very simple to
trigger MOB alerts, make VHF calls on Channel 16 and
switch the Autopilot between Standby and Auto.
To prevent accidental use, the keypad can be locked and
unlocked as required.
The WR20 Handset has been designed to survive the
rigours of the marine environment. It has a tough, sealed
Introduction
9