Product Selection; Product Recognition; Selecting From A List; Disabling Remote Control - Simrad WR20 RemoteCommander Manual

5 PRODUCT SELECTION

5.1 Product recognition

Only WR20 compatible products will be available for selection.

5.2 Selecting from a list

Press the P
the SimNet Network (Fig. 5.1).
Use the
If there are more items above those being shown, then
displayed in the top left corner of the LCD. If there are more items
below those being shown, then
left corner of the LCD.
Pressing the
will now show the current status of that selected Item.
Pressing the
If a product is not available the display will show the product name
at the top of the display and the message.
A product will become
local control at the same time you wish to access it from your handset.

5.3 Disabling remote control

It may be desirable to inhibit remote control of specific products in
the network. Details for enabling or disabling remote control can
be found in the product's operating instructions.
key to display a list of products connected to
RODUCT
pÉäÉÅí= = mêçÇìÅí
^mORJN ^ìíçéáä=K=K
`ä~ëë=a
opUMJO
`uPQJO k^spq^q=K=K=
fpNO fåëí=póë
F
Fig. 5.1 - Product List
or keys to highlight the product you require.
M or key will select the product. The display
ENU
key will return you to the previous menu.
"
Product Not Available
"Not Available"
will be displayed in the bottom
"
if it is under control from a
Product Selection
will be
31