Unpacking; General Instructions; Unpack The 15-30Kva Model Ups (With Casters) - Toshiba 4400 Series Installation And Operation Manual

4

Unpacking

4.1

General Instructions

Unpack the UPS indoors on a paved floor. The UPS should be as close as possible to its final location.
Allow enough space for forklift operations to unpack the UPS from the packing crate. Then remove the
crate. Properly dispose of the crate.
Points to observe:
•
Retain all small articles during unpacking and installation.
•
Make sure that exterior paint is not scratched and that the UPS cabinet is not damaged before
uncrating.
•
DO NOT damage the UPS when using tools to remove packaging materials.
•
If provided, DO NOT remove the protective plastic sheet cover until installation.
•
Do not remove the protective fan covers over the fans until UPS start up. The fan covers
should be removed by factory authorized personnel. Packing materials should be disposed by
the appropriate means.
•
Immediately report any abnormalities to Toshiba Customer Support Center or an authorized
representative.
•
Retain the packing rails for offloading the UPS from the shipping pallet, and for final UPS
installation.
4.2

Unpack the 15-30kVA Model UPS (with Casters)

NOTE: The 4400 UPS is equipped with casters and leveling feet. It is attached to the shipping pal-
let by two unloading rails that double as floor anchors during final placement of the UPS.
TOP HEAVY EQUIPMENT. THIS EQUIPMENT WILL TIP OVER EASILY
UNTIL FIXED IN PLACE.
Lift and move carefully, and only with adequate equipment and trained
personnel. IMPROPER LIFTING CAN RESULT IN INJURY OR DEATH.
4400 Series Installation and Operation Manual – 64527-006
CAUTION
7