Advertisement
The following table shows the RJ45 pin-out assignments for the Ethernet ports.
Connect one side of an Ethernet cable into any switch port and connect the other side to your
attached device. The wiring cable types and maximum cable length are as follows.
• 10/100BASE-TX: 4-pair UTP/STP Cat. 5 Cable, EIA/TIA-568B 100-ohm (100 meters)
• 1000BASE-TX: 4-pair UTP/STP Cat. 5e cable, EIA/TIA-568B 100-ohm (100 meters)
LEDs
Func on
Indicates the traffic
Link/Act
and link status.
Indicates the copper
Speed
port link speed.
4
Descrip on
On: Port is linked to another
device.
Blinking: The traffic is ac ve
On: Port link is 1000Mbps
Off: Port link is 100Mbps or
10Mbps
Advertisement
