Short instructions for use 7 Using handpieces
7 Using handpieces
▶ Take the handpiece (e.g., turbine, motor, PiezoLED, etc.) from the holder.
ð The handpiece is active.
▶ Press the foot pedal.
ð The removed handpiece runs at the set speed or intensity.
▶ Changing speed or intensity with the foot pedal.
ð The left stop corresponds to the minimum speed/intensity.
ð The right stop corresponds to the maximum speed/intensity.
Preselect counterclockwise motor rotation
▶ Take motor off the holder.
ð The handpiece is active.
▶ Slide the cross switch upward.
ð The direction of motor rotation is reversed each time the cross-switch is actuated:
counterclockwise rotation - clockwise rotation.
ð The direction of motor rotation is displayed on the dentist element.
Setting the instrument light
▶ Slide the cross switch to the right. (spotlight function)
ð Cold light "On".
20