Wow SparkMaker Operating Manual page 25

Tank
Use a plastic shovel to remove
the residual resin stuck on the
FEP film at the bottom of the
tank.
＊ Notice:
Please be careful to prevent the bottom of
the tank from being scratched.
46
Paper towel
After pouring the resin in the
tank,carefully wipe the resin
remaining in the tank and the
outer wall of the tank with a
paper towel.
Tank
Finally,carefully wipe the inside of the tank,the outer wall of the
tank and the upper and lower sides of the FEP membrane with
alcohol wipes.
＊ Notice:
The standard of thorough cleaning is that the FEP film is completely free of residue and no
resin,and there is no resin residue inside and outside the tank.
FEP membrane
Tank
Alcohol wipe
47