Replace The Lcd Screen - Wow SparkMaker Operating Manual

Use the big hex wrench
to unscrew the screw on
both sides of the tank
counterclockwise and
remove the tank upward.
＊ Notice:
Big hex wrench ❶ Please remove the printing
Big hex wrench
platform first.
❷ When removing the tank,do not
R e p l a c e t h e L C D s c r e e n
drop the resin on the outer wall
of the tank,the mounting screw
holes,the working panel,the outer
casing and the cover,and the
installation interspace.
Tank
Round head screw ❸ Do not scratch the FEP film
at the bottom of the tank when
removing the tank.
❹ Please place the removed
tank properly on a clean and soft
surface to avoid damage.
55