Wow SparkMaker Operating Manual page 20

T h e k n o b i n d i c a t o r
changes from a flashing
r e d l i g h t t o a g r e e n
breathing light,it means
t h e e n d o f p r i n t i n g .
Remove the cover from
the printer
36
Cover
Model
Handle
After loosening the platform handle
counterclockwise,pull the platform
forward and remove it.
Platform
Model
＊ Notice:
❶ Do not completely unscrew the handle.
❷ Do not touch the printed model directly to
avoid resin contact with the skin.
❸ When removing the platform,do not
drop the resin on the outer wall of the
tank,the mounting screw holes,the working
panel,the outer casing and the cover,and the
installation clearance.
❹ Be careful to avoid model damage when
removing the platform.
37