Replace The Fep Film - Wow SparkMaker Operating Manual

Lay the FEP film under the tank and poke 12 holes in the
position shown with a small hex wrench.
＊ Notice:
❶ Make sure that the position of each hole that is poked matches the position of
the hole in the lower layer of the tank.
❷ Do not damage the FEP film.
❸ Clean all tank parts before replacing the new FEP film.
Lower layer of the tank
Small hex wrench
R e p l a c e t h e F E P f i l m
FEP film
49