Leveling The Printing Platform - Wow SparkMaker Operating Manual

Leveling the printing platform

Use the big hex wrench to loosen the four screws on both sides of
the platform counterclockwise so that the aluminum plate can move
up and down freely.
Big hex wrench
Notice:
＊
❶ Do not unscrew the screw completely.
❷ Make sure the handle is fully tightened.
❸ Please ensure that there are no residual resin
or obstacle on the aluminum plate and the tank
to affect the leveling.
❹ Make sure the tank is installed correctly.
Handle
Big hex wrench
Aluminum plate
27