Removing And Replacing The Dimm Guards - HPE ProLiant DL160 Gen10 Maintenance And Service Manual
Hide thumbs
Also See for ProLiant DL160 Gen10:
- Maintenance and service manual (146 pages) ,
- User manual (134 pages) ,
- Product end-of-life disassembly instructions (13 pages)
Table of Contents
Advertisement
To replace the component, reverse the removal procedure.
Removing and replacing the DIMM guards
Prerequisites
T-15 Torx screwdriver
Procedure
1. If installed, remove the bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack.
b. Remove the server from the rack.
5. Remove the access panel.
6. Remove the right DIMM guard.
Removal and replacement procedures
61
Advertisement
Table of Contents
