Maintenance - SHOWTEC EventSpot 1600 Q4 Manual

EventSpot 1600 Q4
Channel 6 – Control functions (Hold DMX value for at least 2 sec. before the function will be activated)
0-15 No function
16-45 Dimmer fast
46-75 Dimmer slow
76-105 Linear curve
106-135 Square curve
136-165 Inv. Square curve
166-195 S-type curve
Channel 7 – Red Dimmer intensity (CH1 must be set between 1-255
0-255 Gradual adjustment Red from 0-100%
Channel 8 – Green Dimmer intensity (CH1 must be set between 1-255
0-255 Gradual adjustment Green from 0-100%
Channel 9 – Blue Dimmer intensity (CH1 must be set between 1-255
0-255 Gradual adjustment Blue from 0-100%
Channel 10 – White Dimmer intensity (CH1 must be set between 1-255
0-255 Gradual adjustment White from 0-100%

Maintenance

The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01) All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04) The electric power supply cables must not show any damages or material fatigue.
The EventSpot 1600 Q4 requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture's light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light-
output very quickly.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Ordercode: 44051
)
)
)
)
29