Connect The Eventspot 1600 Q4 To The Wireless Dmx Signal Transmitter; Disconnect From The Wireless Dmx Signal Transmitter - SHOWTEC EventSpot 1600 Q4 Manual

Hide thumbs Also See for EventSpot 1600 Q4:
Table of Contents

Advertisement

EventSpot 1600 Q4
Sweden 2.4GHz Wireless communication module
Communication distance:
Test conditions:
Range indoor:
Range outdoor:
Wireless DMX connection
The wireless receiving module "Pico G4 Receiver, 2.4GHz", provided by Swedish WIRELESS SOLUTION, only
has a 2.4 GHz wireless signal receiving function. In order to match the wireless signal, please use the 50175
W-DMX MicroBox F-1 G5 Transceiver by WIRELESS SOLUTION. To control the status of the wireless
communication, please look at the green LED indicator on the control panel of the fixture.
Wi-fi Problems:
01) No emitter/sender matching.
The LED Indicator dims for a long period of time.
02) Matching signal with one emitter, but loss of signal communication.
The LED Indicator light will light up for 100ms and then dim for 100ms; The LED will flicker quickly.
03) Communication with an emitter, but no DMX data.
The LED Indicator will light up for 900ms and then dim for 100ms; The LED will flicker slowly.
When the wireless DMX communication is normal, the LED indicator will always be on.
The EventSpot 1600 Q4 cannot receive a wireless DMX signal and a DMX
cable signal at the same time
When the device is in manual, auto program or built-in program, please ensure that the matching 2.4GHz
wireless signal transmitter is OFF.

Connect the EventSpot 1600 Q4 to the Wireless DMX signal transmitter

The EventSpot 1600 Q4 cannot actively match a random wireless signal transmitter.
In order to create a Wireless match, please check the manual of your wireless signal transmitter.
We advise you to use the W-DMX MicroBox F-1 G5 Transceiver (50175) by WIRELESS SOLUTION (Fig. 08).

Disconnect from the Wireless DMX signal transmitter

The EventSpot 1600 Q4 can be disconnected from the wireless DMX signal transmitter.
You can turn off/unlink the W-DMX if you press the W-DMX button (H) for 3 seconds.
The EventSpot will be disconnected.
Ordercode: 44051
Depending on the transmitting power or transmitter module
W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
60m (approx. through three concrete walls)
250m
Ordercode: 50175
Fig. 08
15

Advertisement

Table of Contents
loading

Table of Contents