Table of Contents
Advertisement
EventSpot 1600 Q4
No function
Warm white
Auto program
01) Press the
button to activate Auto program.
02) The EventSpot 1600 Q4 will immediately start with its built-in program.
Built-in programs
01) Press the
button to activate the Built-in programs mode.
02) Press the
and
03) If you choose program 01, you can set the desired color preset with the buttons
04) Press the
button to set the strobe frequency of the preset colors.
05) Press the
and
between 0-15Hz, from OFF to high strobe frequency.
06) If you choose program 02-16, you can set the program speed and strobe frequency.
07) Press the
button to set the program speed.
08) Press the
and
between 01-100, from slow to fast.
09) Press the
button to set the strobe frequency.
10) Press the
and
between 0-15Hz, from OFF to high strobe frequency.
Manual mode
01) Press the
button to activate the manual mode.
02) Press the
,
,
03) Press the
and
04) In this mode you can create your desired color.
Ordercode: 44051
Blue
Activates the Blue color
White
Activates the White color
Green
Activates the Green color
Purple
Activates the Purple color
Purplish red
Activates the Purplish red color
Orange
Activates the Orange color
White
Activates the White color
Bright pink
Activates the Bright pink color
Light green
Activates the Light green color
Water blue
Activates the Water blue color
Yellow
Activates the Yellow color
Activates the Warm white color
buttons to choose between program 01-16.
buttons to increase/decrease the strobe frequency. The adjustment range is
buttons to to increase/decrease the program speed. The adjustment range is
buttons to increase/decrease the strobe frequency. The adjustment range is
or
button to choose one of the RGBW colors.
buttons to set the intensity of the individual colors between 0-255.
26
-
.
Advertisement
Table of Contents
