Lock; Calibration; Factory - SHOWTEC EventSpot 1600 Q4 Manual

EventSpot 1600 Q4

6.6. Lock

In this menu you can select whether the safety lock is active or not.
01) Press the UP/DOWN buttons until the display shows Lock.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to select Yes or No.
04) If you choose Yes and confirm it with the SET button, the device will be in Lock mode. You will need
to insert the password in order to access the main menu. Simultaneously press the MODE and SET
button for 3 seconds and you will be able to access the main menu.
05) If you choose No, the main menu will remain unlocked.
06) Press the SET button to confirm your choice.

6.7. Calibration

In this menu you can set the white color calibration.
01) Press the UP/DOWN buttons until the display shows Calibration.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to scroll between the static colors Red, Green, Blue and White.
04) If you choose the desired color, press the SET button to adjust the color intensity.
05) Press the UP/DOWN buttons to set the intensity from the desired colors, the adjustment ranges are
between:

6.8. Factory

In this menu you can reset to the default settings.
01) Press the UP/DOWN buttons until the display shows Factory.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to select Yes or No.
04) If you choose Yes and confirm it with the SET button, the device will reset to its factory default
settings.
05) If you choose No, the device will keep current settings.
Ordercode: 44051
Red
Green
Blue
White
24