Replacing a Sensor or Sensor Filter
To avoid personal injury and/or property damage, use only sensors that are specifically designed
for the detector. Refer to See "Replacement Parts and Accessories" on page 102 for more
Each sensor has a high degree of resistance to common vapors and gases. To clear a
l
sensor, move the detector to a clean environment and wait 10 to 30 minutes.
Do not expose a sensor to vapors from inorganic solvents such as fumes from paint
l
thinners, or organic solvents such as benzoic acids and acrylic acids).
Item
1
2
3
4
5
6
BW MaxXT II
Replacing a Sensor or Sensor Filter
Front shell
LEL sensor
PCB
PCB screws (2)
Pump
Rear shell
WARNING
information..
Description
91
User Manual