AXIOMTEK SBC8166 Socket370 Series User Manual page 84

SBC8166 Socket370 Full-size CPU Card Series User's Manual
SYSTEM HALTED, (CTRL-ALT-DEL)
TO REBOOT ...
Wrong Board In Slot
PLEASE RUN EISA
CONFIGURATION UTILITY
,
= 
NOTE:
EISA POST codes are typically output to port
address 300h. ISA POST codes are output to
port address 80h.
POST (hex)
1.
Turn off OEM specific cache, shadow...
2.
Initialize all the standard devices with default values
C0
Auto-detection of onboard DRAM & Cache
C1
1.
Test system BIOS checksum
2.
Test the first 256K DRAM
C3
3.
Expand the compressed codes into temporary DRAM
Copy the BIOS from ROM into E0000-FFFFF shadow
C5
RAM so that POST will go faster
Reserved
01-02
Initialize EISA registers (EISA BIOS only)
03
Reserved
04
-%
Indicates the present boot attempt has
been aborted and the system must be
rebooted. Press and hold down the CTRL
and ALT keys and press DEL.
The board ID does not match the ID
stored in the EISA non-volatile memory.
NOTE: When this error appears, the
Description
standard devices includes:
-DMA controller (8237)
-Programmable Interrupt Controller (8259)
-Programmable Interval Timer (8254)
-RTC chip
area including the compressed System BIOS &
Option ROMs
Continued . . . . .
system will boot in ISA
mode, which allows you to
run the EISA Configuration
Utility.
Award BIOS Reference