AXIOMTEK SBC8166 Socket370 Series User Manual page 82

SBC8166 Socket370 Full-size CPU Card Series User's Manual
KEYBOARD ERROR OR NO
KEYBOARD PRESENT
Memory Address Error at ...
Memory Parity Error at ...
MEMORY SIZE HAS CHANGED
SINCE LAST BOOT
Memory Verify Error at ...
OFFENDING ADDRESS NOT
FOUND
-(
Cannot initialize the keyboard. Make sure
the keyboard is attached correctly and no
keys are being pressed during the boot.
If you are purposely configuring the
system without a keyboard, set the error
halt condition in Setup to HALT ON ALL,
BUT KEYBOARD. This will cause the
BIOS to ignore the missing keyboard and
continue the boot.
Indicates a memory address error at a
specific location. You can use this
location along with the memory map for
your system to find and replace the bad
memory chips.
Indicates a memory parity error at a
specific location. You can use this
location along with the memory map for
your system to find and replace the bad
memory chips.
Memory has been added or removed
since the last boot. In EISA mode use
Configuration Utility to reconfigure the
memory configuration. In ISA mode enter
Setup and enter the new memory size in
the memory fields.
Indicates an error verifying a value
already written to memory. Use the
location along with your system's memory
map to locate the bad chip.
This message is used in conjunction with
the I/O CHANNEL CHECK and RAM
PARITY ERROR messages when the
segment that has caused the problem
cannot be isolated.
Continued . . . . .
Award BIOS Reference