AXIOMTEK SBC8166 Socket370 Series User Manual page 23

SBC8166 Socket370 Full-size CPU Card Series User's Manual
 +  ! ( ) 
  
  
       
1. Make sure the power is OFF.
2. Set the configuration jumpers according to the jumper setting
on Chapter 2.
3. Install the SBC8166 Series into one of the slots on the passive
backplane. You may allow the SBC8166 Series to stand alone
as a single board computer.
4. Connect the I/O cables and peripherals, i.e. floppy disk, hard
disk, monitor, keyboard, power supply and etc. to the CPU
board.
N OTE:
The color of pin one is usually red or blue,
while others are gray.
5. Turn ON the system power.
Installation
!7