Group 2 Remote Extended Maap Bracket (Phases 1 And 2); Figure 18. Ed-1E469, Group 2 Remote Extended Maap Bracket (Phases 1 And 2) - AT&T System 85 Installation And Test

Group 2 Remote Extended MAAP Bracket (Phases land 2)
Install ED-1E469, Group 2 Extended MAAP Bracket (Figure 18) in each Phase 1 or Phase 2
remote module control cabinet. When viewed from the front of the cabinet, this bracket is
mounted on the left cabinet upright as shown in Figure 19 using the hardware provided.
The ED -1E469, Group 2 Extended MAAP Bracket has a circuit pack mounted on the back
that is designated ZAEY1. This bracket and the circuit pack connections are described in
the "Remote Location Cabling" section.
PL 1
E3 E2
El
MAAP
CONNECTOR
" ZAEY 1"
CIRCUIT
PACK
EXTENDED MAAP BRACKET
ED1E469, GROUP 2 (TOP VIEW)
PLO
( BELOW PL 1 )
MAAP
CIRCUIT BREAKER
Figure 18. ED-1E469, Group 2 Remote Extended MAAP Bracket (Phases 1 and 2)
Page 25