Application Launch And Patient Side Selection - Zimmer Biomet iASSIST Knee Manual

Application Launch and Patient
Side Selection
1. Press and hold the "Barcode Scanner" button
(orange button) located at the right of the system
controller computer.
2. Scan the 2D barcode located on the iASSIST Knee
Pod Kit.
Note: If the 2D barcode cannot be read, the user
can enter the barcode manually by activating
the "Enter Barcode" button located at the
bottom left corner of the computer screen.
3. A confirmation sound will trigger and the
application will launch.
Warning: After having scanned the barcode
and powered on the pods, do not exit the
application unless the surgical procedure
has ended. When exiting the application, the
pods will be permanently deactivated. Once
deactivated, the pods cannot be restarted.
Figure 2.3
Application Launch
4. The "Patient Side" view will be displayed. Click the
"L" icon for a left knee or the "R" icon for a right
knee to choose the patient side.
Note: If the wrong patient side is selected at
the beginning of the surgery, the "Side" button
will be accessible once the pods have joined the
network. It will then be possible to change the
patient side.
iASSIST 2-Pod Version Surgical Technique
5 |