Table of Contents
Advertisement
Abduction
Distal Femur Cut Validation (cont.)
Note: To restart the distal femur cut validation,
press the "Z" button on the pod attached to the
validation tool.
Note: To remove the validation tool, manually
lift the tool off the bone straight away from the
cut plane.
8. A drop rod can be inserted in the handle of
the validation tool to check the varus/valgus
orientation of the cut. Make sure that the arm of
the validation tool is aligned with the A/P plane of
the femur.
Adduction
Figure 3.6
Distal Femur Cut – Validation
19 |
Neutral
9. Remove the validation tool, the 3.2 mm headless
trocar drill pins, the femoral saw slot, and the distal
femoral cut guide.
10. Proceed with the tibial registration if continuing
with the proximal tibial cut.
iASSIST 2-Pod Version Surgical Technique
Advertisement
Table of Contents
