Pod Assembly - Zimmer Biomet iASSIST Knee Manual

iASSIST 2-Pod Version Surgical Technique
10 |

Pod Assembly

With the user interface of the pod facing upwards,
1. Identify the nose and insert it in the corresponding
recess.
2. Clip the other side of the pod on the instrument
until the spring holder engages. The system
will automatically monitor any improper
physical connections between the pods and the
instruments.
Figure 3.2
Assembling a Pod to an Instrument
3. To unclip the pod, press on the locking lever and
pull on the pod to disengage the spring holder.
Note: There are no locking levers on the pod
calibration jig.
Warning: Throughout the surgery, always
ensure that the pods are properly assembled to
their corresponding instruments before use.