READ ONE PROGRAM FROM DISK
1
One program to be selected is read into the machine memory from a disk.
READ ALL PROGRAMS FROM DISK
2
All programs on the disk are read into the machine memory.
WRITE ONE PROGRAM ON DISK
3
One program to be selected from the machine memory is written on disk.
4
WRITE ALL PROGRAMS ON DISK
All programs in the machine memory are written on disk.
DELETE PROGRAM
3
Opens a menu where you can delete seam programs:
1 - DELETE ONE PROGRAM IN MEMORY
2 - DELETE ALL PROGRAMS IN MEMORY
3 - DELETE ONE PROGRAM ON DISK
4 - DELETE ALL PROGRAMS ON DISK
1 2 3 4 5 6 7
Fig. 11 - 20
DELETE ONE PROGRAM IN MEMORY
1
Deletes a selected program from the machine memory.
DELETE ALL PROGRAMS IN MEMORY
2
Deletes all programs in the machine memory.
DELETE ONE PROGRAM ON DISK
3
Deletes a selected program from the disk.
DELETE ALL PROGRAMS ON DISK
4
Deletes all programs on a disk.
FORMAT DISK
4
Formats a disk and names it "K3588".
When you format a disk, all data on the disk are erased!
5
STATISTICAL PROGRAM DATA
Displays the following program data:
program number
jig code
obstacles
6
DATA TRANSFER WITH PC
Enables the machine to communicate directly with a personal computer using the
software SYS3000 (for more detailed information please refer to the SYS3000
manual).
Input mode functions
Enter
8
9 0
stitch count
stitch length
number of bytes
Esc
Clear
11 - 12