Special Operating Elements Of The Pfaff 3307-9/01; Setting The Stem Length; Control Panel - Pfaff 3307-3 Series Instruction Manual

7

Special operating elements of the PFAFF 3307-9/01

.05
7

Setting the stem length

.05.01
Fig. 7 - 09
7

Control panel

.06
The control panel is used to call up machine functions for setting up the machine and for
sewing operation, for entering parameter values and for reading error messages and service
settings.
1
Fig. 7 - 10
The control panel consists of the display 1 and the function keys described below. The dis-
play 1 consists of a two-line alphanumerical LCD display with 16 symbols per line. The func-
tion keys 2 are located below and to the right of the display. The status of the function keys 2
and the operating status of the machine are shown by LEDs in the respective keys.
1
2
3
2
●
After loosening screw 1, the appropriate
stem length is set by turning screw 2.
If the stem length setting is al-
tered, the seam pattern input
must be checked.
Controls
21