Special Setting-Up Work On The Pfaff 3307-9; Setting The Stem Length; Inserting And Removing The Sd-Memory Card - Pfaff 3307-3 Series Instruction Manual

9

Special setting-up work on the PFAFF 3307-9/..

.04
9

Setting the stem length

.04.01
Fig. 9 -09
9

Inserting and removing the SD-memory card

.05
Fig. 9 - 10
1
2
2
3
By moving slide 3 it is possible to activate (position "LOCK") or deactivate
the write protection function of the SD-memory card. To store, process or
delete data on the SD-memory card, the write protection function must be
deactivated.
●
Insert the button.
●
Loosen screw 1.
●
Turn screw 2 until the button stem is
slightly under tension.
●
Tighten screw 1.
Inserting the SD-memory card
●
Open cover 1.
1
●
Insert SD-memory card 2 into the card
slot with the label at the front.
●
Close cover 1 again.
Removing the SD-memory card
●
Open cover 1.
●
Press the edge of the SD-memory card 2
lightly – the SD-card is ejected.
●
Close cover 1 again.
Setting up
Switch off the machine!
Danger of injury if the machine
is started accidentally!
The programmed stem length
must correspond to the actual
stem length of the button, see
Chapter 11 Input!
39