Adjustment
13
Adjusting the thread trimmer on the PFAFF 3307-9/..
.25
● Switch on the machine and connect it to the pneumatic system.
● Set parameter "508" at the values "1" / "80".
● Set parameter "510" at values "126".
● Insert yoke head 1 (nut 2) completely.
● Extend cylinder 3 (basic position).
● Adjust yoke head 1 (nut 2) in accordance with the requirement.
● Select the sewing process in order to carry out a cutting test.
● If necessary, correct the setting.
● Switch off the machine and disconnect it from the pneumatic system.
92
Requirement
When the thread trimmer is in its basic position, the knife 4 should be at a distance of 2
mm from the button holder.
2 mm
111-031
Fig. 13 - 23
4
1
2
3