Adjustment
13
Aligning the button holder
.23
● Switch on the machine and set parameter "610" at value "1".
● Loosen screw 1.
● Adjust button holder 2 (screws 3) in accordance with the requirement.
● Move support roller 4 to make contact and tighten screws 1.
● Switch off the machine.
90
Requirement
The needle bar should be centred to the hole in button holder 2.
1
4
Fig. 13 - 21
(only on the PFAFF 3307-9/..)
3
1
2
111-028