Transport - iDM TERRA SWM 3-13 HGL P Technical Documentation And Installation Instructions

3. Allgemeine Informationen

3. Transport

Transport
In order to avoid damages during transport, the heat
pump should be transported to its fi nal installation
site in packed condition on the wooden palett with a
forklift or hand lift truck.
The components and the tubing of the heating- and
heat source site must never be used to transport the
heat pump.
Transport with fork lift
When heat pump is lifted from the wooden palett,
there is a risk of tilting. Therefore, the device must be
lifted and secured with a suffi cient number of persons.
The weight of the heat pump must be considered!
Transport of the heat pump via stairways
The heat pump can be lifted down the stairways step
by step with a sack barrow. A suffi cient number of
Transport with Hand lift truck
persons for securing the device during the transport
shall be present.
If the heat pump must be transported without the
wooden pallet and the protective wooden crate,
it is important that there will be no damage on the
housing.
Sack barrow
Transport facility over stairways for the TERRA SWM
When transporting, the TERRA SWM may not be tilted more than 45°
20
(C) IDM ENERGIESYSTEME GMBH
Installation instructions TERRA SWM