iDM TERRA SWM 3-13 HGL P Technical Documentation And Installation Instructions page 9

Heat pump type
Maximum fl ow temperature
Refrigerant
Quantity of refrigerant
CO - Equivalent
2
Compressor oil
Quantity of compressor oil
Compressor stages
Integrated brine pump
Integrated epansion tank
Nominal fl ow rate of the brine circuit (B0/W35 ΔT=5 K)
Free residual pressure brine pump at nominal speed
Pressure loss heat source side at nominal speed
Connection dimension of brine fl ow and- return fl ow
Integrated loading pump
Nominal fl ow rate heating water (B0/W35 ΔT=5 K)
Free residual pressure loading pump at nominal speed
Pressure loss heating side without passive cooling module nominal speed
Maximum operating pressure heating side / brine side
Heating fl ow / -return fl ow
Electrical data
Electrical power supply compressor
Electrical power supply controller
Max. operating current of compressor
Max. power intake
Starting current
Power factor
Fuse of main power supply heat pump
Fuse of control main supply
If the size of the installation room is lower than the required minimum size, the room must be performed as an engine room according to EN 378.
1
at 80% pump capacity
2
(C) IDM ENERGIESYSTEME GMBH
2)
2
2)
Installation instructions TERRA SWM
Description
Unit TERRA SWM 3-13
°C 62
- R410A
kg 3.0
t 6.3
EMKARATE RL 32-3MAF
l 0.74
- 1-stage modulated
Wilo Stratos Para 15/1-9
lt. 18
m³/h 1.6
kPa 50
kPa 9.5
R 1"
Wilo Stratos Para 15/1-9
m³/h 1.2
kPa 45.4
kPa 8.6
2)
bar 3
R 1"
V / Hz 3~ 400 / 50
V / Hz 1~ 230 / 50
A 9.7
kW 6.1
A < 9
- 0.97
A 13
A 13
9