Mitsubishi Electric MELSERVO-J5 Series User Manual page 58

Installation of the primary side (coil)
Precautions
• It is recommended to install the primary side in the position free from the secondary side. When mounting the primary side
over the secondary side unavoidably, use the material handling equipment such as crane which is fully competent to
sustain the load of attraction force and others.
• When sliding the primary side to the secondary side after installing, be very careful with the attraction force that is
generated.
■Procedure
1.
Mount a part of the secondary side.
2.
Mount the primary side in the position free from the secondary side.
3.
Move the primary side over the mounted secondary side. Confirm that the primary side does not contact the secondary
side.
4.
Mount the rest of the secondary side. Confirm that the primary side does not contact the secondary side.
5 Linear servo motor
56
5.5 LM-F series