Storage Method; Instructions For Disposal - Mitsubishi Electric MELSERVO-J5 Series User Manual

Storage method

• Correctly store the linear servo motor in the package.
Shock-absorbing
material
Package
• When storing the secondary side, put a display such as "Handle with care - Strong magnetic field" on the package or
storage shelf, and also take measures in drawing attention to the surrounding.
• Do not use the deformed packaging box.
• Store the equipment under the following environment.
Item
Ambient temperature
Ambient humidity
Ambience
Vibration resistance
• When lifting the product using a suspender, do not apply shock and stress on the mold part.
1.4

Instructions for disposal

Demagnetize the secondary side by heating over 300 ˚C, and dispose the linear servo motor in accordance with the Law for
Promotion of Effective Utilization of Resources.
Precautions
• The servo amplifier and the primary side of the linear servo motor must be disposed in accordance with "DISPOSAL OF
WASTE".
• Since the secondary side of the linear servo motor uses the permanent magnet, demagnetize the entire secondary side by
heating over 300 ˚C, then dispose in accordance with "DISPOSAL OF WASTE".
• The permanent magnet on the secondary side of the linear servo motor has a suction force against magnetic parts.
Therefore, people who are using medical device such as a pacemaker must check with the medical device manufacturer
whether they can work in such environment.
• Use caution during and after disassembly, prior to demagnetizing the magnetic force on the secondary side.
• When disassembling and disposing the linear servo motor, do not place the magnetic parts (including the primary side,
other secondary side, and tools) closer to the secondary side.
• Use non-magnetic tools to disassemble and dispose the linear servo motor, or when working near the motor. They are
necessary to ensure safety and improve workability.
Product
Environment
-15 ˚C to 70 ˚C (non-freezing)
10 %RH to 90 %RH (non-condensing)
Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
2
49 m/s
1 Handling of Linear Servo Motor
1.4 Instructions for disposal
1
13