Page 104 of 136
Trunk types supported
553-3121-100
Standard 2.0
Chapter 11 — NTMW07 Trunk/Line Card
•
interfaces four PCM signals to one DS-30X timeslot in A10 format
•
transmits and receives SSD signaling messages over a DS-30X signaling
channel in A10 format
•
supports PCM signal loopback to DS-30X for diagnostic purposes.
•
is equipped with Power Fail Transfer (PFT)
The four trunk units on the card support the following types of trunks:
•
Central Office (CO), Foreign Exchange (FX), and Wide Area Telephone
Service (WATS)
•
Direct Inward Dial (DID) and Direct Outward Dial (DOD)
•
Tie Two-way Dial Repeating (DR) and Two-way Outgoing Automatic
Incoming Dial (OAID)
•
Paging (PAG)
Note: All-call zone paging is not supported.
•
Recorded Announcement (RAN).
The NTMW07 Trunk/Line Card also supports Music and Direct Inward
System Access (DISA).
Table 37
is a matrix of the trunk types and signaling supported by the
NTMW07 Trunk/Line Card.
September 1998
Need help?
Do you have a question about the Meridian 1 Option 11C Compact and is the answer not in the manual?
Questions and answers