Table of Contents
Advertisement
Page 90 of 136
Chapter 8 — M2250 Attendant Console
Busy Lamp Field/Console Graphics Module Busy Lamp
Field/Console Graphics Module
553-3121-100
Standard 2.0
The Busy Lamp Field/Console Graphics Module (BLF/CGM) can be added
to an M2250 attendant console.
The BLF/CGM can:
•
display the status (busy or idle) of up to 150 consecutive extensions
within the system (SBLF)
•
display the status of any hundreds group of DNs within the system
(EBLF)
•
display which attendant console is the supervisory console, and which
consoles are active
•
display supplementary information about individual extensions, such as
the reason the person is away (business, vacation, or illness), when the
person is due to return, and an alternate extension where calls to the
person should be directed
•
display a company logo
•
display graphics
•
display text in any one of eight languages
•
have its screen contrast adjusted for easy viewing
Installation
The BLF/CGM mounts on the back of the attendant console and is held
on using snapfits and two screws. It is connected to the console using a
15-way connector that is located on the keyboard printed circuit board (PCB).
This connector is accessed through a rectangular knockout section located
underneath the casing overhang at the Meridian logo location (see
Figure 16
on
page
88).
For more information on the features and operation of the BLF/CGM, refer
to the Busy Lamp Field/Console Graphics Module User Guide (P0706875).
September 1998
Advertisement
Table of Contents
