Vertical Colored Lines Or Banding Check - Lexmark MB2236 Service Manual

Action
Step 19
a
Check the HVPS characterization.
b
Reseat the HVPS cables.
c
Check the HVPS cables for proper installation and damage.
d
Check the HVPS spring contact for proper connection to the
board.
Is the HVPS properly installed and free of damage?
Step 20
Replace the HVPS. See
Note: Make sure to perform the HVPS characterization when
replacing the HVPS.
Does the problem remain?

Vertical colored lines or banding check

Action
Step 1
a
Make sure that the toner cartridge is supported.
b
Make sure that the toner cartridge and imaging unit are not
empty.
c
Check if the toner cartridge is new.
Is the toner cartridge new?
Step 2
Make sure to remove the packing material on the toner cartridge
and imaging unit.
Does the problem remain?
"HVPS removal" on page
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Contact the next
level of support.
231.
Yes
Go to step 2.
Go to step 3.
64
3400-48x
No
Go to step 20.
The problem is
solved.
No
Go to step 3.
The problem is
solved.