Lexmark MB2236 Service Manual page 193

Processor ID
This setting indicates the ID of the processor on the controller board.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > Processor ID
2
View the processor ID.
Serial number
This setting displays a read-only value of the printer serial number.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > Serial number
2
View the serial number.
Model name
This setting displays the model name of the printer.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > Model name
2
View the model name.
Engine setting [x]
Warning—Potential Damage: Do not change this setting without specific instructions from the next level of
support.
This setting allows you to select a printer engine setting. Possible values are 0–255. 0 is the default.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > Engine setting [x]
2
Select a setting, enter a value, and then press
EP setup
Warning—Potential Damage: Do not change this setting without specific instructions from the next level of
support.
This setting allows you to adjust the EP setup of the printer.
1
Enter the Diagnostics menu, and then navigate to:
Printer Setup > EP setup
2
Select a setting.
.
Service menus
193
3400-48x