Lexmark MB2236 Service Manual page 112

Action
Step 12
a
Clear the pick rollers of contamination.
b
Reseat the pick rollers.
c
Enter the Diagnostics menu, and then navigate to:
Input tray quick print > Tray 1 > Single.
Does the problem remain?
Step 13
a
Check the pick rollers for proper installation and damage.
b
Check the shaft of the pick rollers for damage.
Are the pick roller properly installed and free of damage?
Step 14
Replace the pick rollers. See
256.
Does the problem remain?
Step 15
a
Reseat the pick solenoid cable.
b
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests
c
Select Feed solenoid.
d
Check if the pick solenoid actuates.
Did the pick solenoid actuate?
Step 16
Check the pick solenoid for proper installation and damage.
Is the pick solenoid properly installed and free of damage?
Step 17
Replace the pick solenoid. See
page 236.
Does the problem remain?
Step 18
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Motor tests
b
Select Motor (transport drive).
Did the motor run?
"Pick rollers removal" on page
"Pick solenoid removal" on
Diagnostics and troubleshooting
112
Yes No
Go to step 13. The problem is
solved.
Go to step 15. Go to step 14.
Go to step 15. The problem is
solved.
Go to step 18. Go to step 16.
Go to step 18. Go to step 17.
Go to step 18. The problem is
solved.
Go to step 19. Go to step 20.
3400-48x