Repeating Defects Check - Lexmark MB2236 Service Manual

Action
Step 6
a
Reseat all the cables connected to the LVPS.
b
Check the cables for proper connection and damage.
c
Check the fuse for continuity.
d
Check the electronic components on the LVPS for damage.
e
Check the LVPS for proper installation and damage.
Is the LVPS properly installed and free of damage?
Step 7
a
Make sure that the LVPS is compatible with the fuser and the
printer.
b
Make sure that the fuser connector has voltage.
c
Make sure that the correct power input voltage is used.
Does the problem remain?
Step 8
Replace the LVPS. See
Does the problem remain?

Repeating defects check

Action
Step 1
a
Make sure that the toner cartridge is supported.
b
Make sure that the toner cartridge and imaging unit are not
empty.
c
Check if the toner cartridge is new.
Is the toner cartridge new?
Step 2
Make sure to remove the packing material on the toner cartridge
and imaging unit.
Does the problem remain?
"LVPS removal" on page
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Go to step 8.
Contact the next
level of support.
230.
Yes
Go to step 2.
Go to step 3.
47
3400-48x
No
Go to step 7.
The problem is
solved.
The problem is
solved.
No
Go to step 3.
The problem is
solved.