Adjusting The Trunk Support (Flex 2 Seat); Adjusting Width; Adjusting Height - Invacare Bora Series User Manual

1. Loosen screws and clamping levers of dual link
adjustment assembly A and screws of upper and lower
rotational pivots B.
2. Adjust component to desired position.
3. Tighten screws and clamping levers.

5.13 Adjusting the trunk support (Flex 2 seat)

The trunk supports can be adjusted in width, height and
depth.
1528224-Y
Fig. 5-43

5.13.1 Adjusting Width

1. Loosen knobs A that hold lateral supports.
2. Adjust component to desired position.
3. Tighten knobs.

5.13.2 Adjusting Height

• 5 mm Allen key
1. Loosen screws A .
2. Adjust component to desired position.
3. Tighten screws.
Fig. 5-44
Fig. 5-45
Setup
59