Adjusting Powered Chin Control; Adjusting Extremity Control Joystick; Adjusting Joysticks And Switches On Linkage - Invacare Bora Series User Manual

• PROTON wings of head array
• Extremity control joystick for chin control
• Egg switch
• 5/32 inch Allen key
Adjusting Depth
1. Loosen screw A.
2. Adjust rod to desired depth.
3. Tighten screw.
Adjusting Position
The swing-away mechanism can be turned through 360
degrees.
1. Loosen screw A.
2. Adjust to desired position.
3. Tighten screw.
1528224-Y

5.7 Adjusting Powered Chin Control

WARNING!
Risk of Injury or Death
Small parts can lead to choking hazard that may
result in injury or death.
– Do not remove any small parts.
– Closely supervise children, pets or people with
physical/mental disabilities.
CAUTION!
Risk of Injury and Damage
Remaining burrs and missing end caps after
modifications on rods, such as shortened rod, can
lead to injury or damage.
– Deburr cut after cutting excessive length.
– Re-install end cap after deburring.
– Check end cap for tight fitting.

5.7.1 Adjusting Extremity Control Joystick

See "Adjusting Joystick Orientation" in 5.6.1 Adjusting
Extremity Control Joystick, page 43.

5.7.2 Adjusting Joysticks and Switches on Linkage

Positioning Joysticks / Switches
Risk of damage to screws
If you tighten screws to an improper torque, they
might either come loose or get damaged.
– Tighten the screws to a torque of 3 Nm ± 10 %.
Setup
45