Reassembling The Wheelchair; Special Information About Reassembly - Invacare Bora Series User Manual

3.
Pull the remote cable plug out of the electronics system.
4.
Remove the seat upwards. Depending on the type, the
seat can weigh between 16 and 23 kg. Get the help of
the second person if the seat is too heavy to lift alone.

8.4.4 Reassembling the wheelchair

The wheelchair is reassembled in reverse order to the above.
1528224-Y

8.4.5 Special information about reassembly

(Steps 6 – 8 not possible for versions with rear shroud and
fixed batteries)
1.
When reassembling, ensure that the seat guide forks (1)
are placed precisely on the stay bar in the front area.
2.
Ensure that there are no cables in the area around the
rear stay bar (1) to avoid cable damage.
Transport
105