Adjusting Tray Laterally; Adjusting Depth Of Tray/Removing Tray; Swinging Tray Away To Side - Invacare Bora Series User Manual

Hide thumbs Also See for Bora Series:
Table of Contents

Advertisement

5.15.1 Adjusting Tray Laterally

1. Loosen wing screw (1).
2. Adjust component to desired position.
3. Tighten wing screw.
1528224-Y
Fig. 5-47
Fig. 5-48

5.15.2 Adjusting Depth of Tray/Removing Tray

1. Loosen wing screw A.
2. Adjust component to desired position (or remove it
entirely).
3. Tighten wing screw.

5.15.3 Swinging Tray Away to Side

The tray can be swivelled up and away to the side to allow
the user to get in and out of the mobility device.
CAUTION!
Risk of injury! When the tray is raised it does
not lock in place in this position!
– Do not tilt the tray up and leave it leaning in
this position.
– Never attempt to drive with the tray tilted up.
– Always lower the tray in a controlled manner.
Fig. 5-49
Setup
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtr series

Table of Contents