Adjusting Remote Position; Swivelling Remote To Side; Adjustment Possibilities For The Firm Seat Unit; Setting The Height Of The Armrests - Invacare Bora Series User Manual

Invacare® Bora/Spectra XTR Series

5.2.5 Adjusting Remote Position

• 3 mm Allen key
1. Loosen screws A.
2. Adjust component to desired position.
3. Tighten screws.

5.2.6 Swivelling Remote to Side

34
Fig. 5-5
Fig. 5-6
If your mobility device is fitted with a swing-away remote
holder, then the remote can be moved away to the side, for
example, to drive up close to a table.
5.3 Adjustment possibilities for the Firm seat
unit

5.3.1 Setting the height of the armrests

Tools:
• 1 x Phillips screwdriver
The armrest on the Firm seat is fitted with a screw (1) which
is used as a stop. The armrest height is adjusted using
this stop.
1528224-Y