5.10.7 Adjusting Tension Adjustable Backrest Upholstery
1.
Remove backrest cushion (attached with hook–and–loop
straps) by pulling it up and off to access adjustment
straps.
2.
Adjust tension of individual straps as desired.
3. Replace backrest cushion.
1528224-Y
Fig. 5-36
Fig. 5-37
5.11 Adjusting Rea Headrest
CAUTION!
Risk of injury during use of the mobility device
as a vehicle seat if a headrest is wrongly
adjusted or not installed
This can cause the neck to be hyperextended
during collisions.
– A headrest must be installed. The headrest
optionally supplied for this mobility device by
Invacare is perfectly suitable for use during
transport.
– The headrest must be adjusted to the user's
ear height.
5.11.1 Adjusting Position of Rea Headrest or Neckrest
The adjustment of the position is the same for all Rea
headrests and neckrests.
Setup
55